[s-cars] torque values for power steering hose?

[yo-cello at comcast.net]

Perfect, Tom - Thanks! 


Yeah, I've stocked up on new banjo bolts/washers/rings prior to getting started on this, but without the Bentley it's like being without a security blanket (or in this case, a stocked beer fridge...). 


Paul 
95.5 S6 Avant 



----- Original Message ----- 
From: "Thomas R Green" <trgreen at comcast.net> 
To: s-car-list at audifans.com, "Paul" <yo-cello at comcast.net> 
Sent: Saturday, August 7, 2010 5:14:24 PM 
Subject: Re: [s-cars] torque values for power steering hose? 


I see 30 lb-ft for the banjo with crush washers at the rack and 37 lb-ft for the banjo on the pump. The condition of the crush washers and o-rings is probably more important than tweaking the torque-new washers and o-rings is the best plan. 



Tom '95 S6 
'95.5 S6 avant 


On Saturday August 7 2010 yo-cello at comcast.net wrote: 




So of course my laptop died that has my Bentley manuals on it. So I've got to transfer the license to the new one... 


But of course fate intervenes and I'm in the midst of replacing the high pressure hose from the pump to the rack. Can anyone provide the torque values for the the two banjo bolts? Much appreciated! 


Paul