[s-cars] Looking for 92 spec build date and features info
David Forgie
forgied at shaw.ca
Sun Nov 14 14:32:00 PST 2010
Cody: I know all about what Kate says things are *supposed* to occur. This is a previous post I
made (but I don't believe it anymore):
http://forums.quattroworld.com/s4s6/msgs/22607.phtml
I want real world data. For example, I just got an email from a NN098nnn owner who has the CPS
behind the cam sprocket (which Kate says isn't possible). The issue is the break is actually based on
which intake cam going into which engine and then which engine going into which car, starting at engine AAN003911 which was sometime *before* the end of January 1992. January cars ended
with NN089134 so by beginning of February, there were alread some engines with the CPS behind the cam sprocket in the inventory. I want to try to find the breakpoint better than Kate says. I know
of a NN09nnnn car with the tuna can but now also this NN098nnn with the CPS behind the
sprocket.
Kate hides the strut bar real well. You can find it (without an image or call-out number in 805-00)
as: 8A0805645A "connecting pipe".
This is the same bar are the 80/90 bar (where it shows in 805-00 illustration)
Or so I was told.
Dave F.
----- Original Message -----
From: John Cody Forbes <cody at 5000tq.com>
Date: Sunday, November 14, 2010 1:55 pm
Subject: Re: [s-cars] Looking for 92 spec build date and features info
To: David Forgie <forgied at shaw.ca>
Cc: s-car-list <s-car-list at audifans.com>
> ETKA shows the CPS behind the cam gear with a VIN split. 4A-N-
> 100001 and on use the CPS behind the cam gear. I'm having
> trouble finding the tuna can, but I'll find it.
>
> I'm also having trouble finding the strut brace, again I WILL
> find it ;-).
>
> -Cody (mobile)
>
> On Nov 14, 2010, at 2:41 PM, David Forgie <forgied at shaw.ca> wrote:
>
> > The 92 spec cars are the ones with the elm wood trim, trip
> computer, quattro rear defrost script, rear
> > sway bar, etc. I am looking for info two features that
> came and went (came):
> >
> > 1. The early 92 spec cars came with the cam position sensor in
> a vestigial distributor ("tuna
> > can"), as shown here:
> > http://12v.org/urs/TunaCan_Hall_Effect_Distributor.jpg
> >
> > I think the breakpoint for the change to behind the cam
> sprocket was mid-February 1992 but I am
> > not sure. I am looking for VINs, build-dates and
> location of the cam sensor info if you can share it
> > with me (please).
> >
> > 2. The strut bar that came in the 1993 Model year also started
> to be installed on the 1992 MY cars,
> > I think starting in April, maybe March. I am looking for
> VINs, build dates and presence/absense of
> > this bar on the 92 spec cars.
> >
> > Email me directly (or answer online),
> >
> > Thanks in advance.
> >
> > Dave F.
> > _______________________________________________
> > S-CAR-List mailing list
> > http://audifans.com/mailman/listinfo/s-car-list
> > http://www.audifans.com/kb/List_information
>
More information about the S-CAR-List
mailing list