[s-cars] Looking for 92 spec build date and features info
David Forgie
forgied at shaw.ca
Sun Nov 14 14:47:23 PST 2010
Thanks Cody. Our posts/emails obviously crossed in the ether. As I stated in my reply, what Kate
says about the VIN breakpoint for the "tuna can" is not correct.
As for the strut bar as "connecting pipe", I had the secret hiding place (805-00) pointed out to me
back in 2008 when I made this post:
http://forums.audiworld.com/showthread.php?t=2175558
Thanks for digging through the Family Album again though. Bet you were going cross-eyed.
Always good to reconfirm data.
Dave F.
----- Original Message -----
From: John Cody Forbes <cody at 5000tq.com>
Date: Sunday, November 14, 2010 2:26 pm
Subject: Re: [s-cars] Looking for 92 spec build date and features info
To: John Cody Forbes <cody at 5000tq.com>
Cc: David Forgie <forgied at shaw.ca>, s-car-list <s-car-list at audifans.com>
> And finally I found the tuna can CPS. it's hidden in the V6
> engine distributor diagram, but clearly marked as AAN engine
> code. Predictably it shows as being on all cars up to 4A-N-
> 100000. Part number 034 905 215B, illustration 905-50.
>
> -Cody (mobile)
>
> On Nov 14, 2010, at 5:18 PM, John Cody Forbes
> <cody at 5000tq.com> wrote:
>
> > Ok I found the strut bar. They call it "connecting pipe" and
> it's not pictured. They also don't show a VIN split or anything.
> Interestingly the part number is valid on 93-94 100, 92-94 100q
> (which is where S4 parts are found), and 95-98 A6q/S6.
> >
> > -Cody (mobile)
> >
> > On Nov 14, 2010, at 4:55 PM, John Cody Forbes
> <cody at 5000tq.com> wrote:
> >
> >> ETKA shows the CPS behind the cam gear with a VIN split. 4A-N-
> 100001 and on use the CPS behind the cam gear. I'm having
> trouble finding the tuna can, but I'll find it.
> >>
> >> I'm also having trouble finding the strut brace, again I WILL
> find it ;-).
> >>
> >> -Cody (mobile)
> >>
> >> On Nov 14, 2010, at 2:41 PM, David Forgie
> <forgied at shaw.ca> wrote:
> >>
> >>> The 92 spec cars are the ones with the elm wood trim, trip
> computer, quattro rear defrost script, rear
> >>> sway bar, etc. I am looking for info two features that
> came and went (came):
> >>>
> >>> 1. The early 92 spec cars came with the cam position sensor
> in a vestigial distributor ("tuna
> >>> can"), as shown here:
> >>> http://12v.org/urs/TunaCan_Hall_Effect_Distributor.jpg
> >>>
> >>> I think the breakpoint for the change to behind the cam
> sprocket was mid-February 1992 but I am
> >>> not sure. I am looking for VINs, build-dates and
> location of the cam sensor info if you can share it
> >>> with me (please).
> >>>
> >>> 2. The strut bar that came in the 1993 Model year also
> started to be installed on the 1992 MY cars,
> >>> I think starting in April, maybe March. I am looking
> for VINs, build dates and presence/absense of
> >>> this bar on the 92 spec cars.
> >>>
> >>> Email me directly (or answer online),
> >>>
> >>> Thanks in advance.
> >>>
> >>> Dave F.
> >>> _______________________________________________
> >>> S-CAR-List mailing list
> >>> http://audifans.com/mailman/listinfo/s-car-list
> >>> http://www.audifans.com/kb/List_information
> >> _______________________________________________
> >> S-CAR-List mailing list
> >> http://audifans.com/mailman/listinfo/s-car-list
> >> http://www.audifans.com/kb/List_information
>
More information about the S-CAR-List
mailing list