[s-cars] Front Sway Bar Bushing question

[LL - NY]

If the bushings have a split in them (many do) and they're rubber, you may
not even have to disconnect the bar from the ends. You may want to use
teflon tape around the bar at the bushing instead of (or as a supplement to
grease) as I have found that even marine grease doesn't work real well from
keeping at least polyurethane bushings from squeaking like an old wagon and
it's annoying and embarrasing.

On Mon, Oct 3, 2011 at 4:16 PM, Tony Curran <tony.curran at sympatico.ca>wrote:

> Hi folks,
>
>
>
> Whilst installing the new oil cooler I noted that the bushings on the front
> sway bar (stabilizer) are pretty much toast. Is it as simple as
> disconnecting the sway bar at the control are to replace the two bushings?
>
>
>
> Parts are quite cheap, $31 for bushing and $14 for the bracket, so I plan o
> replace these.
>
>
>
> Any BTDTs.
>
>
>
> Cheers,
>
>
>
> Tony
>
> 98 S6
>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>