[s-cars] Half shaft removal

[Wylie Bean]

There are 6 TRIPLE SQUARE--- NOT ALLEN head, bolts that hold the axle on the flange.  Remove them and the axle will come off.  I just did this job 3 weeks ago but can't remember what size triple-square bit it is... 10mm I think, but you'll have to confirm.

Wylie Bean
90 cq
91 90q20v
92 UrS4
08 Q7

-----Original Message-----
From: Duncan Thomson <thomson.duncan at gmail.com>
Sender: s-car-list-bounces at audifans.com
Date: Sat, 8 Oct 2011 12:53:38 
To: <quattro at audifans.com>; s-car list<s-car-list at audifans.com>
Subject: [s-cars] Half shaft removal

Hi guys,

Patient is a '94 UrS4

Just trying to change a CV boot, and struggling to get the half shaft out.
Do I need to remove the allen head bolts from the flange that goes into the
gearbox? Or do I pull that out of the gearbox still attached to the half
shaft?

Thanks!
Duncan
'94 UrS4
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information