[s-cars] Half shaft removal

[djdawson2 at aol.com]

 He needs to look... it could be either.  Some of the boot kits used to come with allen head bolts, so if it has been done before, there's a chance that they are allen head.

 

 

-----Original Message-----
From: Wylie Bean <theringmeister at triad.rr.com>
To: Duncan Thomson <thomson.duncan at gmail.com>; s-car-list-bounces <s-car-list-bounces at audifans.com>; Quattro list <quattro at audifans.com>; S-CAR list <s-car-list at audifans.com>
Sent: Fri, Oct 7, 2011 6:20 pm
Subject: Re: [s-cars] Half shaft removal


There are 6 TRIPLE SQUARE--- NOT ALLEN head, bolts that hold the axle on the 

flange.  Remove them and the axle will come off.  I just did this job 3 weeks 

ago but can't remember what size triple-square bit it is... 10mm I think, but 

you'll have to confirm.



Wylie Bean

90 cq

91 90q20v

92 UrS4

08 Q7



-----Original Message-----

From: Duncan Thomson <thomson.duncan at gmail.com>

Sender: s-car-list-bounces at audifans.com

Date: Sat, 8 Oct 2011 12:53:38 

To: <quattro at audifans.com>; s-car list<s-car-list at audifans.com>

Subject: [s-cars] Half shaft removal



Hi guys,



Patient is a '94 UrS4



Just trying to change a CV boot, and struggling to get the half shaft out.

Do I need to remove the allen head bolts from the flange that goes into the

gearbox? Or do I pull that out of the gearbox still attached to the half

shaft?



Thanks!

Duncan

'94 UrS4

_______________________________________________

S-CAR-List mailing list

http://audifans.com/mailman/listinfo/s-car-list

http://www.audifans.com/kb/List_information

_______________________________________________

S-CAR-List mailing list

http://audifans.com/mailman/listinfo/s-car-list

http://www.audifans.com/kb/List_information