[s-cars] Wiring question

[Tony Curran]

Errik,

I did a little while ago. The wire you want is the gn/bl wire on pin 5 of
the central locking pump under the passenger seat. Snip the gn/bl wire then
wire Orange/black and white wire either side of the snip.

Do you have the instructions?

Cheers,

Tony
96 S6

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Erik Addy
Sent: October-28-11 6:26 PM
To: s-car-list at audifans.com
Subject: [s-cars] Wiring question

Well, I just tried to look this up on my Bentley CD-ROM and discovered that
Bentley does not support Windows 7.  Nice.  Perhaps I should get a 486 with
Windows 95 to go along with my 1994 Audi...
 
Anyway, I am trying to wire in one of those RightClick keyless entry systems
on my '94 S4.  I wired it up the normal way, and it isn't working (well, I
didn't use a relay, but I can't get it to lock or unlock, so I'm not sure
that is the problem).
 
I need to do some more checks, but I was hypothesizing that it might not
work because my alarm doesn't work (I know the PO had a problem with this, I
think they just disconnected something).  However, the door switch for
lock/unlock works, so there should be some way for me to just get the
RightClick unit to simulate to the pump the same input as the door switch. 
Anyone know what color wires the door switch uses, and perhaps where they
connect to the pump (which plug)?
 
Thanks
Erik
_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information