[s-cars] motor mounts

[Steve Mills]

I wouldn't install 034's motor mounts if they were free- entirely too many reports of very early failure, and worse 034 pretending that no problem exists. 

As far as replacing the mounts, check the FAQ in the S4/S6 forum on quattroworld. The driver's side is pretty easy to get at, passenger is a bit more challenging. 

On Aug 29, 2012, at 12:49 PM, Martin Baggenstos <martin.baggenstos at gmail.com> wrote:

> Hello eveyone,
> 
>  I have some worn out motor mounts that need replacement and was wondering
> if anyone has a write up on how to replace them on a 95 S6. They are
> actually polyurethane 034 motor mounts which have worn out over 5 years.
> Does that seem pretty quick to anyone. I am assuming that I could drive the
> car up on a ramp and support the engine with a jack underneath. I have
> changed the snub mount out before which is easy but not the motor or
> transmission mounts, but from what I read, it seems pretty simple and I am
> good with tools and have done other mechanical work on the car before. Any
> advice would be appreciated.
> 
> Martin
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information