[s-cars] 95 S6 B-Pillar IR Receiver

[tom at tomwintermedia.com]

Yeah, it¹s easy to reprogram your car to work with the remote you have. I
had to do it a couple of times with my old S6 Avant.

Here¹s the write up from one of the Audiworld forums (below). If you are
having issues, do a search and you¹ll find a lot of info on this. I¹m pretty
sure AW has a tech article on the process. And the experts here will chime
in as well - good luck! - Tom  2001.5 S4 Avant

-  Switch ignition on; leave key in ignition.
 
 -  Mechanically lock vehicle at left front door, using second key.
 
 -  On  remote  unit, press "Open" button once. A short horn signal will
sound.  
 
 Note: 
 
 The "Open" button is pressed once for programming the first, or a single,
remote  unit.  
 
 When programming additional  remote  units for the second, third or fourth
memory addresses, press the "Open" button two, three or four times, in
one-second intervals.
 
 Example: press the "Open" button once, wait 1 second, then press once again
to program the second  remote  unit.