[urq] Intake air temps

[Bill Bennett]

I am talking  intake air temperature observations, not combustion air 
temps for water misting the intercooler vs water injection on the inlet 
side of the inside of the intercooler with an ambient temperature above 
72 degrees F both cars have a K-26 turbo. outlet temps 5 degrees cooler 
using misting with a spal  fan, recovery time from a 120 F intercooler 
outlet temp with misting, 28 seconds back to ambient with the fan and 
water on, the car with water injection into the intercooler, always 15 
degrees hotter, and the recovery time was over four minutes at 70 mph. 
again not talking combustion temps, when it is warm out, putting water 
on the outside is better than the inside.. or I am not using a large 
enough nozzle, I will switch to the largest nozzle and repost. Best To 
All, Bill