[urq] Cold start fuel enrichment in Boost

[Ado Sigal]

Yes indeed, there a few of makes and methods around, but for CIS E and 
later.
The only one I could find that deals very successfully with basic CIS 
setup, as on Urq here in
Switzerland until 1987, is below mentioned. If you, or other lister know 
of any other, please let
me know, since I am considering to do this mod in the near future, and 
would like to consider
all available options. For us here, this type of change the only option, 
since other changes like EFI
aren't permitted.

Regards,

Ado


Bob DAmato wrote:

> Any experience with this one?
> http://www.autotech.com/powermod.htm
> 
> Ado Sigal wrote:
> 
>> The only device to control fuel or timing for CIS systems is K-Star by 
>> Milford Microsystems.
>> Info can be found here: http://www.stealthracing.co.uk/sr_kstar.html
>>
>>
>>
>> Bill Bennett wrote:
>>
>>> yep, and according to QShip the #5 cylinder will fry, it will receive 
>>> no or little additional fuel, and I have to agree with his Experience 
>>> though only logic having no BTDT. you wanna spray more fuel? do it 
>>> before or at the throttle body to disperse the fuel evenly to the 
>>> cylinders, using the cold start valve will bite your wallet big time. 
>>> Bill
>>>   ----- Original Message -----   From: Paul Caouette   To: 
>>> urq at audifans.com   Sent: Monday, February 02, 2004 7:36 AM
>>>   Subject: [urq] Cold start fuel enrichment in Boost
>>>
>>>
>>>   Has anyone considered (or implemented) using the cold start 
>>> injector to add some fuel with the higher boost levels coming from 
>>> the modified brain boxes?
>>>
>>>   ---
>>>   Paul Caouette
>>>   Denver, Colorado
>>
>>
>>
>>
>> _______________________________________________
>> Audifans urq mailing list
>> Send posts to: mailto:urq at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>> Have an urq question?  Check the Audifans Knowledgebase!
>> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>> Have an urq answer? ... Please help others by adding to the KB ... all 
>> contributions welcome!
>>
> 
>