[urq] Cold start fuel enrichment in Boost

[Mihnea Cotet]

Speed density is unfortunately all but "the modern method". Almost all 
currently-available OEM systems use MAF and not speed density.


Still makes Megasquirt good value for money though, maybe not as accurate 
as a latest generation Motronic, but you can't beat that price!

HTH,

Mihnea

At 20:08 8/02/2004 -0800, Justin wrote:
>Have you looked at Megasquirts' website?  I'm completely sold on it!!!  This
>EFI system will work on anything...(even chainsaws..), and all info is
>available (even the source code, not proprietory like most systems), so you
>have complete freedom to use any type sensors, fuel injectors, etc.  All
>engine management calculations are done by the "Speed density" method...the
>modern method.  And best of all EFI for under $300!!!
>http://www.bgsoflex.com/megasquirt.html
>Justin
>----- Original Message -----
>From: "Ado Sigal" <a.sigal at bluewin.ch>
>To: "Bob DAmato" <bob at audisport.com>
>Cc: <urq at audifans.com>
>Sent: Sunday, February 08, 2004 4:19 PM
>Subject: Re: [urq] Cold start fuel enrichment in Boost
>
>
> > Yes indeed, there a few of makes and methods around, but for CIS E and
> > later.
> > The only one I could find that deals very successfully with basic CIS
> > setup, as on Urq here in
> > Switzerland until 1987, is below mentioned. If you, or other lister know
> > of any other, please let
> > me know, since I am considering to do this mod in the near future, and
> > would like to consider
> > all available options. For us here, this type of change the only option,
> > since other changes like EFI
> > aren't permitted.
> >
> > Regards,
> >
> > Ado
> >
> >
> > Bob DAmato wrote:
> >
> > > Any experience with this one?
> > > http://www.autotech.com/powermod.htm
> > >
> > > Ado Sigal wrote:
> > >
> > >> The only device to control fuel or timing for CIS systems is K-Star by
> > >> Milford Microsystems.
> > >> Info can be found here: http://www.stealthracing.co.uk/sr_kstar.html
> > >>
> > >>
> > >>
> > >> Bill Bennett wrote:
> > >>
> > >>> yep, and according to QShip the #5 cylinder will fry, it will receive
> > >>> no or little additional fuel, and I have to agree with his Experience
> > >>> though only logic having no BTDT. you wanna spray more fuel? do it
> > >>> before or at the throttle body to disperse the fuel evenly to the
> > >>> cylinders, using the cold start valve will bite your wallet big time.
> > >>> Bill
> > >>>   ----- Original Message -----   From: Paul Caouette   To:
> > >>> urq at audifans.com   Sent: Monday, February 02, 2004 7:36 AM
> > >>>   Subject: [urq] Cold start fuel enrichment in Boost
> > >>>
> > >>>
> > >>>   Has anyone considered (or implemented) using the cold start
> > >>> injector to add some fuel with the higher boost levels coming from
> > >>> the modified brain boxes?
> > >>>
> > >>>   ---
> > >>>   Paul Caouette
> > >>>   Denver, Colorado
> > >>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> Audifans urq mailing list
> > >> Send posts to: mailto:urq at audifans.com
> > >> Manage your list connection:
>http://www.audifans.com/mailman/listinfo/urq
> > >> Have an urq question?  Check the Audifans Knowledgebase!
> > >> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > >> Have an urq answer? ... Please help others by adding to the KB ... all
> > >> contributions welcome!
> > >>
> > >
> > >
> >
> >
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question?  Check the Audifans Knowledgebase!
> > http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ... all
>contributions welcome!
> >
>
>
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all 
>contributions welcome!