[urq] Wheel size and offset

[Ingo D. Rautenberg]

Ben,

I've run the v8/200q20v stock BBS 15 x 7.5 ET35 wheels without a problem.
Also ET 30 17x8's.  I have Fuchs ET45 15 x 7's that I bought 25mm spacers
for and should be fine -- effective ET 20, but that's for a 7" wheel -- just
about same clearance as 15x8 ET24 Ronal R8's.  The ET24 works best with '84
and later Urq's.  ET30 and ET35 8" width wheels would be my recommendation
overall.

HTH

-Ingo

----- Original Message ----- 
From: "Ben Swann" <benswann at comcast.net>
To: <urq at audifans.com>
Cc: "Ben Swann" <benswann at comcast.net>
Sent: Thursday, February 19, 2004 10:32 AM
Subject: [urq] Wheel size and offset


Is the size and offset for original Ronal wheels 15" X 8mm with 24mm offset?

I have been looking for suitable replacement, and many of the offsets are
35mm.  I am wondering if I could use these with no problem, esp if going to
16" or 17" wheels?

Comments, suggestions?

Ben
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.588 / Virus Database: 372 - Release Date: 2/13/2004