[urq] Urq brake pedal behaviour

[Jim Haseltine]

Sounds like the first symptoms of a failing master cylinder to me.

Jim Haseltine

----- Original Message ----- 
From: "Ado Sigal" <a.sigal at bluewin.ch>
To: <urq at audifans.com>
Sent: Wednesday, January 14, 2004 11:50 PM
Subject: [urq] Urq brake pedal behaviour


> Hi all
>
> At recent test, engineer complained about the brake system behaviour,
stating that brake pedal shouldn't travel any
> further if pressed successfully several times while the car is stationary
and running. The first time pedal holds
> normal, second time, after momentary hold, it goes a little further down,
third a little further, until eventually it
> goes to the floor, while brakes still holding fine. This never happens
while in motion. Never noticed it before, since
> this motion is normally used when bleeding brakes, but can't verify, since
my other Urq is not in running state; could
> anyone try and confirm please.
>
> TIA and regards,
>
> Ado Sigal
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an Audi question?  Look for your answer in the Audifans
Knowledgebase!
> http://www.audi-quattro.org/kb ... all contributions welcome!
>