[urq] Kupplungskugel mit halterung

[Jim Haseltine]

I've seen a detachable tow bar on an 84 Ur-q, the only cutting I could see
was to the bottom of the rear bumper surround - if you look at the centre of
it from behind you can see a semi-circular shape moulded in the plastic,
that's the piece which was cut out.

Regards,

Jim Haseltine

----- Original Message ----- 
From: "SpotatAshleys" <spotatashleys at hotmail.com>
To: <urq at audifans.com>
Sent: Sunday, January 25, 2004 6:53 PM
Subject: [urq] Kupplungskugel mit halterung


A tow bar to the rest of us!

Has anyone got a tow bar fitted to their urq?
Is it the genuine Audi article?
If so, can it be fitted without cutting bits out of the rear bumper?

I have acquired one that has a detachable ball hitch that can simply be
locked in place when needed. It carries the Audi UK Identification plate
with all the towing weights on it. It also has the manufacturers plate on it
with he following figures:

Type: 305 - 051  Ausr.D
Bauj: 30/86
Prutz: F3516
Stutzlast: 75

The bits that came with it say it is for the Audi Coupe quattro turbo. It
has a large plate, curved at one end that fits inside the boot and curves up
the rear valence withe the main mounting bracket fitting on the outside.

Does anyone have one of these fitted and if so does the bumper have to be
cut. If it does I won't be fitting it.

I have to say it looks a wonderful piece of engineering and must have cost a
fair bit when new.

Any information gratefully received.

Many thanks

Keith

'87 WR (nearly run in, brand new slipping LUK clutch replaced with brand new
Sachs clutch and seems to be fine)
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an Audi question?  Look for your answer in the Audifans Knowledgebase!
http://www.audi-quattro.org/kb ... all contributions welcome!