[urq] Need tie rod for turbo conversion urgently

[Martin Pajak]

In one of our conversions we decided to see if the stock rod will work without bending, a year later and it was still fine (slight rub).
The bend does not have to be as severe as Ur-q, just a nudge... you can install it and see where the worse part is, mark, take off and bend in the vise... or if you are handy with a precision relocator (pry bar) you could bend it while still in the car (after heating it up with a torch).

HTH
Martin Pajak
www.quattro.ca
many a turbo conversions... ;)

---------- Original Message ----------------------------------
From: "Ben Swann" <benswann at comcast.net>
Reply-To: Ben Swann <benswann at comcast.net>
Date:  Tue, 13 Jul 2004 14:01:57 -0400

>After ordering a unit from 2Bennett 4 weeks ago and enquiring why I had not received it last week and being informed that they were shipping it out to me, I followed up again today only to find they did not have the right one and may not be able to get one to me before next week.  Now I am in a pinch as this conversion needs to be completed by the weeks end.   
>
>Short of bending one myself, which I may attempt, does anyone have one they can get me on short order - that is delivered to me in under 3 days - I'll eat the expedited shipping costs if necessary.
>
>I am not too happy that 2Bennett did not understand my short timeframe that I reiterated plenty of times enought to have the decency to call me and inform that there would be a delay.  This car needs to be on the boat to Germany mid-next-week.
>
>Ben
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>