[urq] Need tie rod for turbo conversion urgently

Bill Bennett ur.quattro at verizon.net
Wed Jul 14 00:32:03 EDT 2004


and only do this on your own car, never for a friend, AKA possible litigant,
not a nice possibility (yeah business owner opinion) Bill
----- Original Message -----
From: "Martin Pajak" <Martin at quattro.ca>
To: <quattro at audifans.com>; <urq at audifans.com>; "Ben Swann"
<benswann at comcast.net>
Cc: "Ben Swann" <benswann at comcast.net>
Sent: Tuesday, July 13, 2004 12:51 PM
Subject: Re: [urq] Need tie rod for turbo conversion urgently


> In one of our conversions we decided to see if the stock rod will work
without bending, a year later and it was still fine (slight rub).
> The bend does not have to be as severe as Ur-q, just a nudge... you can
install it and see where the worse part is, mark, take off and bend in the
vise... or if you are handy with a precision relocator (pry bar) you could
bend it while still in the car (after heating it up with a torch).
>
> HTH
> Martin Pajak
> www.quattro.ca
> many a turbo conversions... ;)
>
> ---------- Original Message ----------------------------------
> From: "Ben Swann" <benswann at comcast.net>
> Reply-To: Ben Swann <benswann at comcast.net>
> Date:  Tue, 13 Jul 2004 14:01:57 -0400
>
> >After ordering a unit from 2Bennett 4 weeks ago and enquiring why I had
not received it last week and being informed that they were shipping it out
to me, I followed up again today only to find they did not have the right
one and may not be able to get one to me before next week.  Now I am in a
pinch as this conversion needs to be completed by the weeks end.
> >
> >Short of bending one myself, which I may attempt, does anyone have one
they can get me on short order - that is delivered to me in under 3 days -
I'll eat the expedited shipping costs if necessary.
> >
> >I am not too happy that 2Bennett did not understand my short timeframe
that I reiterated plenty of times enought to have the decency to call me and
inform that there would be a delay.  This car needs to be on the boat to
Germany mid-next-week.
> >
> >Ben
> >_______________________________________________
> >Audifans urq mailing list
> >Send posts to: mailto:urq at audifans.com
> >Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> >Have an urq question?  Check the Audifans Knowledgebase!
> >http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> >Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
> >
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!



More information about the urq mailing list