[urq] EM removal

[Brandon Rogers]

You may also want/need the turbo oil line gaskets.  ISTR them being a pain
in that some were available aftermarket but one or two were still
dealer-only.

Have fun!

Brandon

----- Original Message ----- 
From: "Thatcher Hubbard" <personal at thatcherhubbard.com>
To: "ur-q @audifans" <urq at audifans.com>
Sent: Tuesday, June 01, 2004 2:43 PM
Subject: [urq] EM removal


>    I've finally found the time and the location to do an EM
> removal/repair/replace on my '83 with a WX.  I know that at the very
> least I should need:
>
>    EM to head gaskets (x5)
>    EM to turbo gasket (x1)
>    EM to head studs (x10?)
>    IM gasket (x1)
>
>    How can I tell if I have shouldered or non-shouldered nuts from my EM
> studs?  I'd like to have all the parts I could reasonably expect to
> need on hand when I start tearing this thing apart.
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!