[urq] Rear hub dimensions

[Gary Brown]

Bill, I do not get the play in the hub at 3 and 9 o'clock.
Thanks     
Gary
  ----- Original Message ----- 
  From: Bill Bennett 
  To: Gary Brown ; urq at audifans.com 
  Sent: Wednesday, May 19, 2004 12:06 AM
  Subject: Re: [urq] Rear hub dimensions


  Gary if the hub is damaged where it fits into wheel bearing it will not be tapered, it will have a definite step or shoulder to it about 1mm smaller on the inboard end. and the "machining" on the smaller part will be rough, not shiny Do you have the same play at 3 and 9 too? Yes I really want to know so you don't waste time and money, so please let me know before you buy or take stuff apart,, gotta go 24 is about to come on. Bestus, Bill
    ----- Original Message ----- 
    From: Gary Brown 
    To: urq at audifans.com 
    Sent: Tuesday, May 18, 2004 9:36 AM
    Subject: [urq] Rear hub dimensions


    Hey all:
     Does someone here have access to the dimensions of the rear wheel hubs on the urq?
     
    Specifically the part that resides in the inner wheel bearing.
    Reason is, I'm getting a clunking. 

     With the right rear wheel off the ground and holding it at 6 and 12, I can feel it move. 

    Wheel bearings are brand new. 

    I've been told it can be that the hub has tapered from the inside to the outside, and also it could be the bearing is moving around between the clips.

    TIA
    Gary
    _______________________________________________
    Audifans urq mailing list
    Send posts to: mailto:urq at audifans.com
    Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
    Have an urq question?  Check the Audifans Knowledgebase!
    http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
    Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!