[urq] More of the car that wouldn't start

[Charles Baer]

somebody get that BR guy outta my head! ;-)
Double check this 'cuz, like Sam Clemens,  " I have a very poor memory.."

I had a piece of 2" ID ABS pipe lying around that was a perfect fit for 
the igloo
end of the intake hose.  Cut a 6-8" length and put on and end cap, be 
liberal with
the black solvent glue.  I put on an NPT fitting so I can use an inline 
regulator to
get the 10-15psi depending on whether it's hooked to the ABS or the #6 
Rubbermaid
cup that I loaned to Brandon for his 3B diagnoses.  That also permits 
using the
Motive bleeder or a pump-up yard sprayer for air pressure if you don't 
have a
compressor on hand.

I ... THINK... the igloo diameter is 60mm?  Also I am completely 
clueless about
the other clamp points along the intake path until I get home and find 
my written
notes.

Charlie


Brandon Rogers wrote:

>hopefully somebody will chime in *hint* hint* who has made the little plug
>from pvc pipe.  you drill it and install a air fitting so you can hook it up
>to a compressor- keep pressur elow- like 10 psi or so.  Some people
>recommend disconnecting the line the ECU as precaution...I don't have one of
>these anymore as it won't fit the intake hose for a 3B...
>
>so somebody else chime in please
>