[urq] Boost levels

[Pasqualoni, James E]

Does the ECU have the MTM/Bosch 3 bar pressure transducer?  IIRC, the MTM 1+
should be good for 24-25 psi out of the K24.

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of K B
Sent: Tuesday, November 23, 2004 3:05 PM
To: urq at audifans.com
Subject: [urq] Boost levels 


This is kind of an off subject post.
 
I have a friend who is running an S6 AAN motor in his car and stock it pulls
strong 
and gets full boost. He recently got an MTM plus stage one chip and has
installed it and there is absolutely no difference in boost and should
according to MTM and 
the person he got it from pull 20 lbs of boost. The ECU seems to have the
MTM 
seal and we have no reason to believe that its not an MTM plus stage one
chip.
 
Any suggestions would be most helpful. Checked for boost leaks and vacuum
leaks. shouldnt it just be a plug & play type of thing? Or plug and pray as
the case may be. Any BTDT's?
 
Thanks !
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!