[urq] Boost levels

[Rich Letsinger]

Is the wastegate cap drilled to access the preload
adjustment on the spring?  If not, the issue could be
the wastegate creeping open before full boost is
reached.  IA recomends drilling a hole to pop out that
small center cover and then screwing the preload down,
up to 6 turns, until full boost is reached.

Rich

--- K B <audinut2004 at sbcglobal.net> wrote:

> This is kind of an off subject post.
>  
> I have a friend who is running an S6 AAN motor in
> his car and stock it pulls strong 
> and gets full boost. He recently got an MTM plus
> stage one chip and has installed it
> and there is absolutely no difference in boost and
> should according to MTM and 
> the person he got it from pull 20 lbs of boost. The
> ECU seems to have the MTM 
> seal and we have no reason to believe that its not
> an MTM plus stage one chip.
>  
> Any suggestions would be most helpful. Checked for
> boost leaks and vacuum leaks.
> shouldnt it just be a plug & play type of thing? Or
> plug and pray as the case may be.
> Any BTDT's?
>  
> Thanks !
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans
> Knowledgebase!
>
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding
> to the KB ... all contributions welcome!
> 



		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com