[urq] Re: B5 S4 vs A8 Rotors

[Wolff]

I can confirm that 5KTQ rotors work properly on an urq with G-60 calipers.
And to confirm that S4 rotors do not work, my G60 calipers came off of an
urS4 and came with used S4 rotors. The rotors had too deep a hat.
    The V8 rear brakes were bolt on with V8 rotors. I did need new parking
brake cables and new hoses all the way round.
HTH,
Wolff
----- Original Message ----- 
From: "John Karasaki" <johkar at teleport.com>
To: "Kneale Brownson" <knotnook at traverse.com>; "Daniel Jones"
<captaudi at bellatlantic.net>
Cc: "urq list" <urq at audifans.com>
Sent: Sunday, September 19, 2004 9:45 PM
Subject: RE: [urq] Re: B5 S4 vs A8 Rotors


> The ur-S4 front rotor can not be used on the urq.  There hat is too deep.
>
> The ur-S4 front rotor is NOT the same as the 5kt/200tq 10v rotor.
>
> The B5 S4 rotor can be used with BIRA system 2 brackets and Boxster S
> calipers but this setup requires a 17" wheel.
>
> If you want to stay with 15" wheels, the A4 rotor is about the biggest you
> can use.  The A8 rotor requires a 16" wheel.
>
> I have a setup that uses Wilwood 4 piston calipers with the original urq
> rotors and will fit under 15" wheels.  As I don't have a urq anymore, I
> could be convinced to sell the kit. ;)
>
> Regards,
>
> John