[urq] Air flow boot gasket #

[Bill Bennett]

Todd
  the ETKA shows that 035 133 361 is the correct PN have you tried to lube 
the contact surface of the metal suction hood with liquid dishwahing soap 
prior to installing the hood?
   Best, Bill
----- Original Message ----- 
From: "todd ward" <ltw0808 at yahoo.com>
To: <urq at audifans.com>
Sent: Friday, April 01, 2005 2:08 PM
Subject: [urq] Air flow boot gasket #


> After Ingo's find on his air flow plate spring, I
> decided to check mine. All was well, but the rubber
> O-ring that seals under the boot{5" diameter}was
> broken in two places. No Flaps or Lowe's and HD could
> help. So after convincing the dealer that I have a
> metal boot not rubber a part was found #035-133-361
> described as a washer. This O-ring doesn't allow the
> metal boot to fit flush like the old one and appears
> to be a slightly larger diameter than OE. Question,
> Should this fit flush? Does anyone have the part # for
> this O-ring? So I can help the dealer find the right
> one. Thanks Todd
>
>
>
> __________________________________
> Yahoo! Messenger
> Show us what our next emoticon should look like. Join the fun.
> http://www.advision.webevents.yahoo.com/emoticontest
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!