[urq] Air flow boot gasket #

[Jim Haseltine]

That's the correct part number for all but the really early cars. When it is 
new it is very difficult to push the air duct down over the thing, a little 
lubrication (a lick of petroleum jelly) helps.

Regards,

Jim Haseltine

----- Original Message ----- 
From: "todd ward" <ltw0808 at yahoo.com>
To: <urq at audifans.com>
Sent: Friday, April 01, 2005 11:08 PM
Subject: [urq] Air flow boot gasket #


> After Ingo's find on his air flow plate spring, I
> decided to check mine. All was well, but the rubber
> O-ring that seals under the boot{5" diameter}was
> broken in two places. No Flaps or Lowe's and HD could
> help. So after convincing the dealer that I have a
> metal boot not rubber a part was found #035-133-361
> described as a washer. This O-ring doesn't allow the
> metal boot to fit flush like the old one and appears
> to be a slightly larger diameter than OE. Question,
> Should this fit flush? Does anyone have the part # for
> this O-ring? So I can help the dealer find the right
> one. Thanks Todd
>
>
>
> __________________________________
> Yahoo! Messenger
> Show us what our next emoticon should look like. Join the fun.
> http://www.advision.webevents.yahoo.com/emoticontest
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!
>