[urq] 3" exhaust

[Martin Pajak]

Guys, 

You are doing the oranges/apples again.  S cars have a different exhaust.  Much better stock than the Ur-q.
I believe this is the reason 20v Ur-q went to dual CATs with dual pipes all the way to the centre muffler.

I don't want this to get into aregument "why?".  
All I want is a 3" system that is bolt on and others (who choose to) can purachase as well.

Thanks!
Martin Pajak

http://www.quattro.ca


---------- Original Message ----------------------------------
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
Date:  Tue, 9 Aug 2005 12:46:59 -0400 

>On Tuesday, August 09, 2005 12:38 PM, Schaible, David wrote:
>
>I'm skeptical as to the value of this, has someone validated that the
>exhaust is the flow restriction with a 3b running a k24 @ 2.5 bar ?
>
>I have had my 3b 200 avant setup like this for many years with the dual
>exhaust, and my friend a trusted tuner also believes it is not a
>restriction. 
>
>Maybe full on rs2 setup might require this...... but yeah I know.....it's
>certainly not going to hinder performance
>
>David Schaible
> 
>----------------------------------------------------------------------
>
>I agree David.  Last year, some CO guys on the s-car list ran a dyno
>comparison between a AAN with no exhaust and a AAN with full stock exhaust
>system.  In the end, the max power output was identical!  I can't recall if
>there was a difference in the spooling/power curve, but I do not recall
>there being much of a variance in power between the two setups.  I can also
>mention that after having moved from the stock exhaust system to a 3"
>turbo-back Stromung, I perceived no gain in power or spooling response in my
>UrS6 with full RS2 setup.
>
>Jim
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>