[urq] part identification

[Martin Pajak]

Ed,

If it is rather large and brown (as well as the connector) than it is the
Cold Start Valve thermoswitch.

Hope this helps.

Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (305,000 km) In storage
1985 Audi Ur-quattro (203,000 km) Euro spec. import mit 3B ;o)
1986 Audi 4000s quattro (270,000 km) winter car
1971 Porsche 911T (45,000 mi) all original



-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
Behalf Of Ed Kellock
Sent: February 11, 2005 12:51
To: Urq List
Subject: [urq] part identification


'85 WX

What is the sensor at the back of the head?

It has two tabs.  The connector plug has one wire going to one contact
and two wires going to the other.

Etka is confusing.  (possible understatement)

"early" p/n is 056 919 369P
"later" p/n is 171 919 521F but it is stated to be 1 pin.

Does the "thermoneumatic valve" on the side of the block fail often?

Thanks,
Ed
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!