[urq] RE: Brake servo overhaul

[W. Bremer]

I believe it was Sean MacLane at AudiQtroCp at aol.com
Bill
----- Original Message ----- 
From: "Martin Pajak" <martin at quattro.ca>
To: "Justin Riley" <jriley at ctiusa.com>; <DGraber460 at aol.com>
Cc: <urq at audifans.com>
Sent: Wednesday, February 16, 2005 4:00 PM
Subject: RE: [urq] RE: Brake servo overhaul


> Justin,
>
> Sorry, I am only hosting the procedure, the actual author may know better.
> Except they did not sing their work... anyone know who wrote this
procedure?
> i did not keep the original e-mail that I got it from.
>
> As for parts, someone mentioned SportWheels... anyone know for sure?
>
> Cheers
> Martin
>
>
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
> Behalf Of Justin Riley
> Sent: February 16, 2005 15:45
> To: DGraber460 at aol.com
> Cc: urq at audifans.com
> Subject: RE: [urq] RE: Brake servo overhaul
>
>
> Martin,
>
> I have performed this rebuild out of necessity, but only replaced the
> one large o-ring (Which was difficult to obtain).  I found out the hard
> way how much spring pressure was retained, as I removed the retaining
> screw and promptly had the innards shoot into my shin. Ouch!  Thanks for
> the guide, it should make life less painful for others.  Also, I was
> able to compress the spring easily by inverting the assembly against the
> floor and pressing down with my weight against the spring.
>
> Where did you source the seal and other o-rings to do the rebuild?
>
> Justin R.
>
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
> Behalf Of DGraber460 at aol.com
> Sent: Saturday, February 12, 2005 12:19 AM
> To: martin at quattro.ca; AudiQtroCp at aol.com
> Cc: urq at audifans.com
> Subject: Re: [urq] RE: Brake servo overhaul
>
>
>
> In a message dated 2/11/2005 10:43:16 A.M. Mountain Standard Time,
> martin at quattro.ca writes:
>
> Thanks!
>
> Document uploaded and ready for viewing  at:
> www.quattro.ca main page or direct link  at:
> http://www.quattro.ca/Urq/Brake_servo_guide.pdf
>
> Hope this  helps
> Cheers
> Martin Pajak
>
> http://www.quattro.ca
>
> 1983 Audi  Ur-quattro (305,000 km) In storage
> 1985 Audi Ur-quattro (203,000 km) Euro  spec. import mit 3B ;o)
> 1986 Audi 4000s quattro (270,000 km) winter  car
> 1971 Porsche 911T (45,000 mi) all original
>
>
>
> -----Original Message-----
> From: AudiQtroCp at aol.com  [mailto:AudiQtroCp at aol.com]
> Sent: February 10, 2005 22:26
> To: martin at quattro.ca
> Subject: Fwd: Brake servo  overhaul
>
>
> Regards Martin
>
> Sean
> _______________________________________________
>
>
> Great page, and very helpful.
> I, however, have been told that the parts are NLA. Is that  true?
>
>
> Dennis
> Denver
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>