[urq] Vacuum Leaks and the Diff Lock Actuators

[Charles Baer]

I couldn't help rambling a bit farther and wondering if instead of
scrubbing plugs in Utah, we should have plugged the line to to the
diff lock plumbing.  Heat soaked CIS + intake leak = massive air
dilution (too lean to pop!)

hmmmm.....

Charlie

Andrew Finney wrote:

>Excuse the rambling.......
>..<snip>.. if it rips, it introduces a leak that is only an
>issue when the diffs are not actuated (most of the time). So, try
>pulling a vacuum on both side of your actuators, both sides must hold
>vacuum, if not you have a vacuum leak, likely at idle....<snip>.
>