[urq] UrQ M/C upgrade update

[John Karasaki]

The S4/S6/V8 one doesn't have the all the ports you need.  However, I used 
a "T" fitting to handle the rear lines.

I distinctly remember that I did NOT use any 5ktq or 5ktqw MC.  I had both 
(I might still have the spare 5ktqw MC laying around).  I wanted to use the 
shorter MC with the updated reservoir NOT the longer 5ktqw MC that uses the 
old, crappy reservoir.

HTH.

John

At 04:42 PM 7/1/2005 -0400, AUDIJIM at aol.com wrote:
>HTH,
>
>The parts that I have are from an S4/S6/V8 including the reservoir. I 
>don't see how they would work in my UrQuattro application. I think the 
>correct upgrade is from the 5000 TQ Avant being P/N 447 611 021 and 
>reservoir P/N 443 611 301 A. This M/C has the same bore dimensions and 
>also the ports for the lines that go to the bleeder and proportioning valve.
>
>Your the first to reply to me about this, but I get the UrQ list in digest 
>form, so I might be behind some replies.
>
>Thanks for the feedback,
>
>Jim Furdyn
>1983 UrQuattro #170
>1987 4000cs Q
>1987 Euro 200/5000cs TQ 282,000 miles
>1996 A6 Quattro Avant
>1987 Mercedes Benz Truck model 1219