[urq] Part #

[Bruce Bell]

Jim those part numbers are for the whole assembly including the bearing.
447 407 615 A is for the hub and is compatible with both the 75 mm and 82 mm
bearings as ID on both bearings is the same. IIRC this hub is also common to
most 100/200 and 5000's of the period. Rear hub is unique to the urq as far
as I can find.

Bruce 
 
-----Original Message-----
From: Jim Haseltine [mailto:jim_haseltine at ntlworld.com] 
Sent: Monday, July 18, 2005 3:45 PM
To: BTMeadows at aol.com; urq at audifans.com
Subject: Re: [urq] Part #

Up to the end of 'F' vin (85MY) it's a 75.07mm bearing #443 498 625 (inc. 
fittings)
after that it's an 82mm bearing #443 498 625 E (inc. fittings)

Regards,

Jim Haseltine

----- Original Message ----- 
From: <BTMeadows at aol.com>
To: <urq at audifans.com>
Sent: Monday, July 18, 2005 3:58 PM
Subject: [urq] Part #


> Would anyone have the part number for a the front wheel hub  relatively
> handy?  Thank you so much.  It's for a '85 if that makes  any difference. 
> Thank
> you.....I really, really, really appreciate  it.  I'm trying to work out 
> one of
> those definitive "If it's not one thing  -- it's another" type of 
> situations
> as I'm sure WE'RE ALL VERY USED TO!!!!
>
> Benjamin
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!
> 


_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!