[urq] 3B conversion

[Martin Pajak]

I know the '83 tranny does not have the cutout for the stock 3B/MC sensor block.  I had to use a 5ktq tranny to be able to use stock MC sensor block.
The WX sensor block (single) might have issues, I never got into it as a 5ktq tranny was available to me.

HTH
Martin Pajak

http://www.quattro.ca



>
>>Hey guys,
>> 
>>For those that have done the 3B conversion and retained the UR transmission.
>>Were you able to make the UR engine speed sensor work in the stock location
>>with the 3B flywheel? It looks like the sensor is only covering about half of 
>>the teeth on the flywheel and I am not sure this is enough to get the signal to the ECU.
>>I think this may be my problem.
>> 
>>Any BTDT's?
>> 
>>Thanks
>> 
>>Ken 
>>_______________________________________________
>>Audifans urq mailing list
>>Send posts to: mailto:urq at audifans.com
>>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>>Have an urq question?  Check the Audifans Knowledgebase!
>>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>>  
>>