[urq] Leaky oil cap

[j.koenig]

A new rubber gasket should make a perfectly good seal.  The only problem with the rubber 
ones is that they're more 'slippery.'  In practice, this means they're more likely to slip 
out of place if they're overtightened, especially if you've used some slick-o gasket 
sealer (ask me how I know!).  If you're stumped, it might be worth another look.
Good luck.
John

----- Original Message ----- 
From: "Andrew B" <andrew.sb at gmail.com>
To: "Pasqualoni, James E" <james.pasqualoni at gs.com>; <urq at audifans.com>

#2, when I swapped my head, I used a replacement gasket set which
included a rubber valve cover gasket, like this:
http://www.partsamerica.com/ProductDetail.aspx?mfrcode=BAR&mfrpartnumber=0361444&parttype=107&ptset=A
Would a cork one make a better seal?

I don't understand how it's only on one side of the engine, and not
the other....

-Andrew