Fwd: [urq] water cooled turbo conversion
Ed Kellock
ekellock at gmail.com
Thu Mar 3 13:13:38 EST 2005
I converted to the single oil filter assembly and had to have some
custom fittings made for the oil cooler lines. The new fittings are
the ones that screw into the oil filter housing. There's a hydraulic
hose shop here that cut and brazed fittings for me.
-----Original Message-----
From: Brandon Rogers [mailto:brogers at terrix.com]
Sent: Thursday, March 03, 2005 10:45 AM
To: urq at audifans.com; Gaidos, A
Cc: ekellock at adelphia.net
Subject: Re: [urq] water cooled turbo conversion
Hmm - I think you still need to change out the lines but I could be
wrong. IIRC the water jacketed turbos all have smaller oil line
flanges to make room for the water lines.
Ed - you just did this --? anybody else have info on this?
Brandon
'84 ur
----- Original Message -----
From: a.j.gaidos at comcast.net
To: Brandon Rogers ; Gaidos, A ; urq at audifans.com
Sent: Thursday, March 03, 2005 10:26 AM
Subject: Re: [urq] water cooled turbo conversion
I was planning on using a K26 again. I had custom oil lines made a
number of years ago and I'm hoping they'll work with an coolant
jacketed K26 as well.
-------------- Original message --------------
> Don't forget - The oil line(s) for the K26 will not fit the K24. I know the
> oil ines from a _1985_ (and only 1985)5kt will fit the K24 with twin oil
> filter unit - that's what I had done. That's the easiest solution if you
> can find '85 lines. Or you can switch to a single oil filter unit and I
> don't recall if the oil fittings match - or if you need adapters...?
>
> Plus you'll want a new rubber elbow into the cold side of the turbo - the
> K24 has a bigger inlet and I doubt you'll be able to stretch an old hardened
> one over the flange.
>
> I have two K24s I may be willing to part with - email me off list.
>
> hth
>
> Brandon
> '84 ur
>
>
>
>
> ----- Original Message -----
> From: "Gaidos, A"
> To:
> Sent: Thursday, March 03, 2005 7:35 AM
> Subject: RE: [urq] water cooled turbo conversion
>
>
> > Yeah, the turbo. That's the next thing - finding one. Seems in any case
> > I'll
> > probably end up getting one rebuilt as I don't know I'd trust a used one.
> >
> >
> > -----Original Message-----
> > From: Ed Kellock [mailto:ekellock at gmail.com]
> > Sent: Wednesday, March 02, 2005 9:01 PM
> > To: a.j.gaidos at comcast.net; urq at audifans.com; Tony Lum
> > Subject: Re: [urq] water cooled turbo conversion
> >
> >
> > Sounds about right. I got all the parts needed (except turbo and
> > freeze plug fitting) from a junkyard 200t auto for hella cheap.
> >
> >
> > ----- Original Message -----
> > From: "Tony Lum"
> > To: ;
> > Sent: Wednesday, March 02, 2005 4:38 PM
> > Subject: Re: [urq] water cooled turbo conversion
> >
> >
> >> At 01:05 PM 3/2/2005, a.j.gaidos at comcast.net wrote:
> >> >All,
> >> >
> >> > Didi Ferris at Carlsen had put together a kit to upgrade the old
> > oil
> >> > cooled turbos to the water jacketed K26. She's long gone so who do
> > we
> >> > contact and does anyone have her old parts list?
> >> >
> >> >Thanks
> >> >
> >> >Anton
> >> >_______________________________________________
> >> >Audifans urq mailing list
> >> >Send posts to: mailto:urq at audifans.com
> >> >Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/urq
> >> >Have an urq question? Check the Audifans Knowledgebase!
> >> >http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> >> >Have an urq answer? ... Please help others by adding to the KB ...
> > all
> >> >contributions welcome!
> >>
> >> Hi Anton,
> >>
> >> This is a partial list of the major items, you'd also need various
> > hose clamps.
> >>
> >> Ref: FA P/L for '87 5cstq
> >>
> >> 1. 035 121 133 T outlet flange, same as on 5kcstq
> >> 2. 035 102 111 B union, this is the freeze plug replacement
> >> 3. 035 121 497 B hose, lower from freeze plug to turbo
> >> 4. 035 121 498 C hose, upper from turbo, runs behind timing
> > cover
> >> 5. 035 121 498 B hose, flange to #4 above
> >> 6. 903 580 01 banjo bolt to flange
> >> 7. N 013 814 9 copper sealing washer for #6 above
> >>
> >> HTH,
> >>
> >> Tony
> >>
> >> -Tony
> >> '83 ur-quattro # 302
> >>
> >>
> >> _______________________________________________
> >> Audifans urq mailing list
> >> Send posts to: mailto:urq at audifans.com
> >> Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/urq
> >> Have an urq question? Check the Audifans Knowledgebase!
> >> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> >> Have an urq answer? ... Please help others by adding to the KB ...
> > all contributions welcome!
> >
> >
> >
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question? Check the Audifans Knowledgebase!
> > http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ... all
> > contributions welcome!
>
More information about the urq
mailing list