[urq] re. urq] Family album

[Ben Swann]

I was able to do this on my '83 prior to painting which entailed stripping the body completely.  It was difficult to remove without breaking, but I have done on two coupes, so may have an extra if you find yours breaks upon removal.  You need to carefully depress those tabs - use a small flat instrument - thin flat blades on both sides while gently prying up and it shoud come out intact.

Ben

[Date: Fri, 18 Mar 2005 19:51:30 -0000
From: "SpotatAshleys" <spotatashleys at hotmail.com>
Subject: Re: [urq] Family album
To: <gmbchef at comcast.net>, <urq at audifans.com>
Message-ID: <BAY101-DAV79164AE313F86B8201FCDBB4A0 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

In my experience the rear nozzle is unlikely to be re-useable after removal.
It has lugs that open out when pressed in to the hole and prevent it being
pulled out again. Order a new one first if I were you.
Re: the tail lights. These are sealed in with a mastic-like gunk which does
not set hard but takes slow constant pulling pressure with sore fingertips
to remove (after having removed the nuts inside of course). A heat gun
sounds a good ised. It will soften the sealer.
HTH

Keith

'87 WR]
-------------- next part --------------
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005