[urq] urq MC 1 Upgrade: Wiring Harness Questions (With a better Link!)

[Frank de Kat]

>
>Hello All!
>
>For those who have reused or upgraded their urq to  a MC 1 wiring harness, 
>I have a few questions.
>
>In my excitement to rip the MC motor out of the donor car, I was a bit lax 
>in documenting. I've figured out what all the wiring harness connectors 
>are, but am in a bit of a quandary, as I didn't label what sensor the 
>harness was removed from..
>
>Looking at this picture:
>
>http://www.sentex.net/~fdekat/mc_sensors.jpg
>
>There's the single wire sensor on top (1), the double sensor at the back 
>(2), the multi pin sensor on the bottom (3), and the sensor in the block (4).
>
>
>I'm trying to find out which sensors above belong to connections 19 & 20 
>in this picture:
>
>http://www.sentex.net/~fdekat/MAC%2011%20Harness%20Connections.jpg
>
>
>I'm thinking that due to the physical type of connector, 19 & 20 would 
>have to belong to sensor No. 2 (above). But which one where?
>
>And also.. What are the other sensors for, if they don't go to the ECU 
>wiring harness?
>
>Any help would be welcome...
>
>Thanks very much!




Frank de Kat
fdekat at sentex.net
Dundas, Ontario, Canada

http://www.sentex.net/~fdekat
(To see the "Rally Pictures")