[urq] no start - hall sender voltage never changes.

[Tony Hoffman]

That is what it sounds like. It is supposed to be 4.5, then zero, then 4.5...........  Can't remember which is "in window", but you get the point. If that's not what you are seeing, the hall sender is bad.
 
Tony Hoffman
 
BTW, I went through the same thing a while ago, turned out to be a bad coil on mine.
 

boomer <cbaird1358 at charter.net> wrote:
Hey guys, I had a no start condition on my car a month ago and it cleared up after a few hours. No start returns, no spark at all. 
Ignition on, ohm meter probe in the middle wire of the hall sender, plugged in, turn over the car with a socket wrench and stop at the window with no change in voltage (8.5 volts). 
Turn over again with the socket wrench not pausing at the window like a normal engine revolution and the voltage never went to zero or fluctuated. 
The window is supposed to lose voltage at that moment which triggers the spark from the coil correct? 
So... I need rod to get me a hall sender. 
Is this correct? it is an 83 urq manufacture date 3/82

Thanks for the help previously and futurely! boomer
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question? Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com