[urq] Brake Booster

Pasqualoni, James E james.pasqualoni at gs.com
Fri May 13 14:21:59 EDT 2005


Part number is 447 611 021.  This corresponds to the 25 mm bore as opposed
to the 23.5 mm bore on the stock early models.  I found mine at SJM Auto.

HTH,
Jim

-----Original Message-----
From: Tony Lum [mailto:tlum at flash.net] 
Sent: Friday, May 13, 2005 2:12 PM
To: Pasqualoni, James E
Subject: RE: [urq] Brake Booster


At 04:06 AM 5/13/2005, you wrote:
>Had the same experience.  Moved to G60's up front and urS4/S6 vented 
>rotors in back, and that left me with much greater pedal travel than 
>the stock setup.  A switch to the MC used in European UrQ's equipped 
>with G60's did the trick.  Don't have the p/n handy, but let me know if 
>you need it.
>
>Jim

Hi Jim,

If you find that #, could you post it?  I'm already halfway down that road 
(G60's) and have a set of V8 rear calipers almost ready to go in.

Thanks,


-Tony
'83 ur-quattro # 302



More information about the urq mailing list