[urq] Dash swap ?'s

[Tony Hoffman]

You would want to use the newer heater control. I remember something being different, but don't recall exactly what. Maybe the mounting points. 
 
You can use your instrument cluster, IIRC. I believe you have to use the clear plastic and surround from the mewer car, use your instruments. Your plastic has different mounting tabs. 
 
I don't recall there being brown covers for the instrument cluster. Any '85 - '87 4000/Cgt should work, though.
 
If you just have a bad switch, you can drill a small hole in the side and spray contact cleaner into it. It's worked about 75% of the time for me.
 
Tony Hoffman

AudiQtroCp at aol.com wrote:
*Do I use the same heater control unit ?

*Do I use my original intstrument cluster, but utilize the switch mounts and 
the covers from the 4k/Cgt?

*Huw warns to expect to have to play around with the hazard light circuit to 
get it right, can anyone else be more specific to their findings on this?

**** And there are a couple more items I need, can anyone here help?

1 CGT window switch (4k if they are the same) ( at least 1 )

1 top cowling/cluster cover (dark brn preferred)

1 trim panel (where all the switches mount)

Thanks guys
Sean
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question? Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!

		
---------------------------------
Yahoo! Mail
 Stay connected, organized, and protected. Take the tour