[urq] swaybar bushings...or others for that matter

[spot.ontheroad]

Mike
If you mean the bushings on the front of the swaybar, attachiing it to the
subframe, I am currently trialing some for Superflex Ltd which will
hopefully make it in to production shortly all being well. I only fitted
them a few days ago so its early days yet. They fitted well and easily. The
part number is: SPF2659/26K
They already make the swaybar end bushes (the ones that fit either side of
the swaybar end over the upright link from the wishbone) The part number for
these is I think: SPF1794
I don't think they do the ones that are actually in the wishbone yet.
The website for Superflex is: www.superflex.co.uk
The guy who runs it is Chris Witor.
Hope this helps you.

Keith

'87 WR

p.s. I should add that I have no real connection with Chris Witor or
Superflex other than I asked if they made such bushes. They said no, but if
I could supply a subframe they could make some. So I supplied them with a
plaster mould of the subframe (not having a subframe to spare) and the cap
that holds the bush  and an OEM bush and they made the bushes from this I
guess.

----- Original Message -----
From: "Mike Fitton" <rfitton at vt.edu>
To: <urq at audifans.com>
Sent: Sunday, May 15, 2005 11:23 PM
Subject: [urq] swaybar bushings...or others for that matter


> Anybody know where to get some good polyurethane ones?  I disconnected
> the swaybar to replace the wheel and strut bearings and those bushings
> suck.  I don't think I want the Delrin ones...they seem a little too
> hard.  But these big rubber bands have to go.  I see that IA has the
> A-arm ones, so I'm not worried about those.
>
> -Cheers!
> Mike
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>