[urq] Brake Master Cylinder P/N 443~447 611 021

[Pasqualoni, James E]

This MC will bolt right on to your hydraulic booster, and the hard lines
match right up.  You will need a different reservoir, but I don't have the
p/n for that.

HTH,
Jim

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Maurits Jonkergouw
Sent: Thursday, May 19, 2005 3:41 AM
To: Audifans
Subject: [urq] Brake Master Cylinder P/N 443~447 611 021


Could someone please confirm if the (G60 25,4mm) BMC 447 611 021 body  has
similar physical outer dimensions as it's (23,8mm) predecessor P/N 443 611
021.

Is the newer type BMC still "bolt on" the old servo and does the same
reservoir and hard lines fit? The AQS picture on ETKA shows this BMC in
(brackets) which means the current "picture" is not accurate. The A20Q
however (1990 6 11 53-00) shows the correct BMC without (brackets) but this
looks shorter and the reservoir is completely different from what I will be
using.

Thanks again.

Regards,
Maurits

1986 GV (Swiss WR)
1985 CGT KV
1982 GL DD

_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!