[urq] Early 83 Fusebox/Relay Question

[Buchholz, Steven]

... it is hard to say without pictures ... but just from your
description I'd say your '83 sounds pretty similar to mine ... 

I would not suggest that the IST docs were the bible for the urq wiring
... it may have been correct early on, but I doubt that they made any
attempt to keep it up to date as the changes were made during
production.  I would refer you to the standard wiring diagram for the
reference designators and such.  For the auxiliary modules bolted in the
various places of the ury you may find yourself trying to identify
things by the wiring color codes.  I think there's a label attached to
the back side of the cover in the "cubby" below the steering wheel ...
this might also be helpful.

Steve B
San Jose, CA (USA)
> 
> While attempting to track down the location of the injector cooling
fan
> relay, Mike Deltergo referred me to the IST docs.  In the first book
on page
> 45, there is a schematic of the fuse box and relay locations.  My
relays
> look surprisingly different!  Both the number and locations seem to be
very
> different from the IST docs.  In the place of where some of the relays
are
> supposed to reside are some plastic boxes with two fuses inside them,
then a
> clear plastic cover over those.
> 
> Anyone have any info on what I might be looking at?