[urq] Interior Interchange Question

[Andrew Finney]

Keith, I thought the coupe quattro ('89-'91) used bolts to hold down the 
rear seat bottom? Will that work anyway? Not sure about the top of the back 
seat though. Will the front seats fit? Also, I thought both sections of UrQ 
carpet had to come from a 4000Q (80Q) because of the size of the 
transmission tunnel, is it only the rear carpet? That would be good news for 
me.
 Thanks for input.
 Andrew Finney
1983 and 1985 UrQs.

 On 9/7/05, spot.ontheroad <spot.ontheroad at virgin.net> wrote: 
> 
> Andrew
> As far as I am aware the coupe quattro interior will be a straight swap 
> for
> that of an urq. The Coupe interior will swap too with the exception of the
> rear rection of the carpet- the floor pan is a different shape and thus so
> is the carpet moulding. Everything else should fit.
> 
> Keith
> 
> '87 WR
> ----- Original Message -----
> From: "Andrew Finney" <afinn1 at gmail.com>
> To: <urq at audifans.com>
> Sent: Wednesday, September 07, 2005 11:16 PM
> Subject: [urq] Interior Interchange Question
> 
> 
> > This may be a dumb question, but the only model that fully interchanges
> > with
> > the UrQ interior is the 4000 series right? I know, seat backs are
> > different
> > and there was a change in seat slider handle locations in '84 but, as an
> > example, a coupe quattro rear seat (top and bottom) will not fit an urq,
> > right?
> > Andrew Finney
> > 1983 and 1985 UrQs.
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question? Check the Audifans Knowledgebase!
> > http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ... all
> > contributions welcome!
> >
> 
> 
>