[urq] Front/Rear Suspension Updates

[urquattro at comcast.net]

OK, so just to make annoyingly crystal clear here...

If a person had worn-out '82 suspension all around and didn't care about originality but wanted to still have a rear sway bar, they could upgrade to CQ control arms/sway bars and RR ball joints both front and back? Is this a bolt-up operation? 

Thanks Martin; I know this knowledge was earned through some hard work!
Jon

Message: 2
Date: Wed, 9 Aug 2006 12:03:44 -0500 (EST)
From: "Martin Pajak" <martin at quattro.ca>
Subject: Re: [urq] Rear control arms
To: "j.koenig" <j.koenig at adelphia.net>
Cc: urq at audifans.com
Message-ID: <4316.66.163.19.99.1155143024.squirrel at wm1>
Content-Type: text/plain;charset=iso-8859-1

John,

For the 1983.5 and up it's only for the fronts... rear ball joints on
those are a non issue anyway and completely different.
For the 1981-83 you can also replace the rears with these as well... and
upgrade the rear swaybar at same time.

Cheers

-- 
Martin Pajak

http://www.quattro.ca

1982 Audi Ur-quattro (50,000 mi) new project
1983 Audi Ur-quattro (85,000 mi) Concourse d'Elegance
1985 Audi Ur-quattro (212,000 km) Euro spec. import mit 3B :)
1987 Audi 4000s quattro (205,000 km) wintervagen