[urq] A/C - fan always on?

[Renneisen, Eric 475]

> Radiator fan should be continuously on when A/C is engaged on speed 1
or 2
> (I forget which).

According to the IST doc, A/C should engage the rad fan at high speed on
the urq.  I think the 200 just turns on low speed.

It all depends on how it is wired up.  The 200 utilizes an external
resistor pack for both low and medium speed.  The urq has one internal
resistor for medium speed and an external one for low.  Sounds like your
fan isn't wired to the A/C relay at all.  Does your fan have multiple
speeds?  Do you have the external resistor pack from the 200 mounted
somewhere?

Eric R.
'86 urq
'93 S4 - dead tranny  :^(


------------------------------------------------------------------------------
CONFIDENTIALITY NOTICE: If you have received this email in error, please immediately notify the sender by e-mail at the address shown.  This email transmission may contain confidential information.  This information is intended only for the use of the individual(s) or entity to whom it is intended even if addressed incorrectly.  Please delete it from your files if you are not the intended recipient.  Thank you for your compliance.  Copyright 2006 CIGNA
==============================================================================