[urq] A/C - fan always on?
Brandon Rogers
brogers at terrix.com
Mon Jun 5 18:29:15 EDT 2006
Yeah I have the whole 200 fan and harness installed - including the big
blue resisitor plate as well as the big fuse. Steve Eiche did my wiring
( hey I know what I'm _not_ good at ...) so I cannot comment on the
actual wiring - I just know what its doing or not doing.....
and the rad fan is not coming on and staying on when A/C is turned
on.....
-----Original Message-----
From: Renneisen, Eric 475 [mailto:Eric.Renneisen at CIGNA.com]
Sent: Monday, June 05, 2006 3:30 PM
To: urq at audifans.com
Cc: brogers at terrix.com
Subject: [urq] A/C - fan always on?
> Radiator fan should be continuously on when A/C is engaged on speed 1
or 2
> (I forget which).
According to the IST doc, A/C should engage the rad fan at high speed on
the urq. I think the 200 just turns on low speed.
It all depends on how it is wired up. The 200 utilizes an external
resistor pack for both low and medium speed. The urq has one internal
resistor for medium speed and an external one for low. Sounds like your
fan isn't wired to the A/C relay at all. Does your fan have multiple
speeds? Do you have the external resistor pack from the 200 mounted
somewhere?
Eric R.
'86 urq
'93 S4 - dead tranny :^(
------------------------------------------------------------------------
------
CONFIDENTIALITY NOTICE: If you have received this email in error, please
immediately notify the sender by e-mail at the address shown. This email
transmission may contain confidential information. This information is
intended only for the use of the individual(s) or entity to whom it is
intended even if addressed incorrectly. Please delete it from your files
if you are not the intended recipient. Thank you for your compliance.
Copyright 2006 CIGNA
========================================================================
======
More information about the urq
mailing list