[urq] euro Bumper
Michele_Deltergo at KeyBank.com
Michele_Deltergo at KeyBank.com
Thu Jun 1 16:12:58 EDT 2006
The valances, AFAIK , are the same. The protrusions, F & R, should be
uniform end to end. Maybe your bumper shocks are too long as the center
difference seems fine and the edges severe.
Mike
On the weekend, I started installing the front Euro
bumper that I brought back from Germany. The rebar
bolts in perfectly and the bumper fits into the
existing valance, but it looks a bit odd: near the
center of the car, the protrusion of the bumper
relative to the upper lip of the valance is about
1/2", whereas the protrusion at the edges of the
bumper is about 1.5" - 2". In effect, the upper lip of
the valance appears to come to a point. Is the North
American valance different than a European one? Is my
valance or bumper deformed?
When I look at pictures of Euro UrQ's the protrusion
is fairly constant.
Any thoughts or BTDT's would be greatly appreciated.
Alex Stickler
Caledon, ON
'83 URQ with 3B 20VT
'90 V8 Q with 370,000 km
*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.
127 Public Square, Cleveland, OH 44114
*******************************************************************************
If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.
More information about the urq
mailing list