[urq] RE : RE : Gear-shift linkage

[Louis-Alain Richard]

Positive.

 

If you want, I can scan an old bill with that part number on it. :-)

 

LAR

 

-----Message d'origine-----
De : Andrew Finney [mailto:afinn1 at gmail.com] 
Envoyé : 21 novembre, 2006 16:39
À : Louis-Alain Richard
Cc : acattard at yahoo.com; urq
Objet : Re: RE : Gear-shift linkage

 

Are you sure these aren't the studs?

On 11/21/06, Louis-Alain Richard <laraa at sympatico.ca> wrote: 

-----Message d'origine-----
De : Andrew Finney [mailto: afinn1 at gmail.com <mailto:afinn1 at gmail.com> ] 
SNIP>>>>>>>>>

  <http://filebox.vt.edu/users/rfitton/ETKA/7_11_56-00.pdf>
http://filebox.vt.edu/users/rfitton/ETKA/7_11_56-00.pdf

Look at item 35 (431 711 429B), if this is your problem, order the 2 bushings 
that are listed for it, 803 711 279E. And while at it, order also the #27
bushing for the big rod. Both are cheap at OEM

SNIP>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  

Last time I replaced "no. 35" it was not cheap and the bushings were not
available separately.Was I tricked by the stealer?

 Andrew Finney

1985 UrQ

 

 

Yes and no. 

 

The rod is 105.00$CAN, but the bushings ARE available, I just called my dealer 5
minutes ago, 10.13$CAN each. 

 

IIRC, 2 years ago, when I asked them for the bushings, they told me that the rod
only is available, (as illustrated on the PDF drawing) but the listing clearly
states "ball socket, to be used for: 431 711 429B". 

 

Maybe your part counter clerk was not able to read ? :-)

 

Louis-Alain

PS: This rod IS the same as the one on the 5ktq... and any 4kq, Quantum, 200,
Type43 and Type 44.