[urq] Compomotive Wheels

[Andrew Finney]

Yes, but the factory 15x9s don't fit without the sport quattro fenders, so
they might be right.

On 10/24/06, Peter Sinkevich <pete at s-werks.com> wrote:
>
> Hi Andrew,
>
> ET 40 is going in the wrong direction, just like you thought.  Sport
> Quattro
> 15x9's have an ET12 if that would give you an idea.  Personally I would
> get
> them exactly like that as the factory couldn't have been wrong.
>
> Kindest Regards,
>
> Peter Sinkevich
>
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
> Of Andrew Finney
> Sent: Tuesday, October 24, 2006 5:46 PM
> To: urq at audifans.com
> Subject: [urq] Compomotive Wheels
>
> Does anyone know what offset would work best with an UrQ for the 16x9 MO
> wheels? The car has rolled front and rear fender lips (rear was stock).
> 2Bennett thought that it would need to be at least 40, but I thought it
> needed to be more like 15, moving the wheel away from the upright. Anyone
> have any thoughts or experiences. Thanks.
>
> Andrew finney
> 1985 UrQ
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
>
>