[urq] tranny seal leak - prop shaft
QSHIPQ at aol.com
QSHIPQ at aol.com
Thu Dec 13 18:41:07 PST 2007
When you remove the tail piece, also a good time to consider doing the late
style center locker (you can drive the dog clutch roll pin out, and it will
sit in the bottom of the trans tail vs fishing with a magnet for it). On the
pre 84 urq's, you also want to remove the spring that is under the boot of
the locking shaft, and replace the boot (you can use a brake caliper boot for
this). That spring was deleted in 84> center lockers.
HTH
Scott J
In a message dated 12/13/2007 7:37:53 P.M. Central Standard Time,
martin at quattro.ca writes:
Just to add to the excellent description.
I also changed the bearing at the same time.. sort of while I'm in there.
Cheers
Martin
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
> Of Fluhr
> Sent: December 13, 2007 4:33 PM
> To: urq at audifans.com
> Subject: Re: [urq] tranny seal leak - prop shaft
>
>
>
> Brandon says:
> >So it looks like I have a leak in the prop shaft output seal on my
> >tranny (stock '84 016). Sweet. I'm told you are supposed to remove
> >tranny and separate from the diff ( I think) in order to get to that
> >seal. Anybody know different - or know a shortcut? According to Ben
> >this is just a little bit of work...ha!
>
> I just did this on my '82 urq, and it was not nearly that hard.
> I did not have to remove the whole diff, the back of the rear diff
> comes off. You have to disconnect the prop shaft at the
> tranny. Then just take off a few bolts and pull out the rear
> diff cover, which includes the output flange & shaft & bearing &
> diff lock gear. I needed a press and some heat to get the gear
> off the shaft, which was the hardest part of the entire procedure.
> That let me pull the shaft out so I could get to and replace
> the seal. Installation is the reverse of removal.
>
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
More information about the urq
mailing list